Capturing Screen of KS0108 (SG12864)

Using LcdTap-Pico2 Universal

Connection

The KS0108 has two CS signals, but LcdTap has only one, so we use the RST pin as CS instead.

Also, LcdTap does not have an R/W signal, so we take the logic of R/W and E signals and input them to the WE pin. If R/W is fixed Low, you can connect the E signal directly to the WE pin.

For displays with 5V interface, a 5V-3.3V level converter is required.

Configuration

Load the "KS0108" preset.